ESSCO PROCESS VALVES
Engineered valve solutions for industrial, marine and process applications.
Let’s talk, call us on 01489 779068
Bespoke valve packages.
It’s what we’re good at.
We specialise in industrial valve and actuator solutions that are built to suit your application.
We stock an extensive range of valves, from ¼” (8mm) to 24” (600mm) and associated electric and pneumatic actuators.
Our team has the knowledge and expertise to support you in the management and operation of your facility.
Talk to us to find out how we can help.
Formerly known as VAC. New name, same great service.
Industrial Valves and Actuators
We offer technical assistance in the selection and sizing of valves and actuators, with same-day emergency turnaround available.
Our products are assembled and tested by our knowledgeable team, supported by ISO quality accreditations.
Actuation accessories include custom-built control cabinets, solenoid valves, switch boxes, positioners, manual overrides, extensions and deadman’s handles.
Actuator Manufacturers
ESSCO are the main UK agent for NUTORK Electric & Pneumatic Actuators.
We also have many years experience with actuator manufacturers including:
Electric: Valpes, Enolgas, Bernard, Rotork, Auma
Pneumatic: Kinetrol, Norbro, Hytork, Air Torque
Marine Applications
With marine valves in a range of materials including all grades of bronze, iron, steel, monel, stainless and super duplex, we offer a solution for most applications.
We’re the experts when it comes to the identification and specification of valves and valve related products.
Where possible we can attend your site or port to help identify the best solution.
Our Service
Impartial advice and solutions
We are a proudly independent company offering impartial advice and solutions to assist in all aspects of valve selection.
On-time quotations
Our service standards recognise the need to provide quotations, products and projects on time and to a deadline.
Solid relationship and distribution agreements
Our distribution agreements with some of the key European valve & actuator manufacturers mean we can offer solutions from stock for all industries, including: –
-
Oil & Gas
-
Petrochemical
-
Pharmaceutical
-
Consumer Health
-
Brewing
-
Defence
-
Water & Wastewater
News & Case Studies
VAC has a new name but same great team!
The Valve and Actuator Company (VAC) are delighted to announce that due to continued growth and expansion they have rebranded to become ‘Essco Process Valves’ (EPV).
Automation of existing valves at chemical process site
A major chemical process site had a requirement to automate valves in a large section of their plant, but due to running conditions they were unable to isolate, drain and remove the existing manual ball valves and replace with actuated valves.
Always ready, waiting and stocked!
Recently our client, an M&E contractor, was faced with a small window of opportunity to install a large quantity of butterfly valves, non-return valves and Y type strainers up to 12” (300mm) for a chilled water application.
New Penstocks for UK research site
A major UK research site had ‘traditional’ BS7775 cast iron Penstocks installed that featured an ‘allowable’ leak rate that was unacceptable.
GET IN TOUCH WITH US
Call 01489 779068 or use the form below to get in touch.
Fields marked with an * are required.